The influence of defects on the quality of the wrought aluminum alloys
Keywords:
internal defects, properties, refining, modification, wrought aluminium alloysAbstract
Objective. Study of the effect of internal defects on the properties of the deformed billets of aluminum alloys. Material. As the material for the present study were selected wrought aluminum alloys B95 system Al–Zn–Mg–Cu and 01570 of the system Al–Mg–Sc. Methods. Investigated internal defects arising during deformation in the semis, grain structure, methods of improvement of billets and mechanical properties of aluminium alloys after processing, refining additives and a complex modifier based on silicon carbide. Results. Conducted complex research has shown the active influence of the method of obtaining blanks of semi-finished products on the occurrence of internal defects. In this case, the least amount of internal defects detected during electro refining and modification of nanodispersed refractory particles. Received a more dispersed structure of alloys 01570 B95 and that leads to increasing of complex of mechanical and technological properties. Scientific novelty. For aluminum alloys, the relation between the processing of the melt (refining, modification) and the formation of internal defects in workpieces. Practical significance. Understanding of the causes of the formation of internal defects and methods of their elimination, will allow you to control the structure and the complex technological and mechanical properties, enhancing the quality and yield of rolled products.
References
Drits M.E., Korolkov U.P., Guk U.P. Razrushenie aluminievih splavov pri rastjagivajushih naprjaghenijah [Destruction of aluminum alloys under tensile stresses]. Moscow: Nauka, 1973, 347 p. (in Russian).
Novikov I.I. Gorjachelomkost tsvetnih metallov i slitkov [Hot brittleness of nonferrous metals and bullion]. Moscow: Nauka, 1966, 153 p. (in Russian).
Vilischuk Z.V., Kalinina N.E. Nanomodificatori perspektivnih aluminievih splavov [Nanomodifiers for perspective aluminum alloys]. Visnik Dnipropetrovskogo natsionalnogo universitetu. Raketno-kosmichna tehnika [Bulletin of Dnipropetrovsk national univercity. Rocket and space technique]. Dnipropetrovsk, 2011, Vol. 15, № 2, pp. 26–29. (in Russian).
Vilischuk Z.V., Kalinina N.E., Kalinin A.V., Salnikova A.U. Korrozionnaja stojkost nanomodifitsirovannihaluminievih splavov [The corrosion resistance of aluminum alloys nanomodified]. Visnik Dnipropetrovskogo natsionalnogo universitetu. Raketno-kosmichna tehnika [Bulletin of Dnipropetrovsk national univercity. Rocket and space technique]. Dnipropetrovsk, 2010, Vol. 14, № 2, pp. 83–87. (in Russian).
Vilischuk Z.V., Musina E.A. Povishenie korrozionnih svojstv aluminievih splavov pri modifitsirovanii [Increasing the corrosive properties of aluminum alloys at nanomodified]. Visnik Dnipropetrovskogo natsionalnogo universitetu. Raketno-kosmichna tehnika [Bulletin of Dnipropetrovsk national univercity. Rocket and space technique]. Dnipropetrovsk, 2014, Vol. 17, № 1, pp. 22–26 (in Russian).
Solntsev U.P., Belikov S.B., Volchok I.P., Shejko S.P. Spetsialni konstruktsijni materiali [Special construction materials]. Zaporighghja: VALPIS–Poligraf, 2010, 536 p. (in Ukrainian).
Drits M.E. Aluminievie splavi. Svojstva, obrabotka, priminenie [Aluminium alloys. Properties, processing, application]. Moscow: Metallurgia, 1979, 679 p. (in Russian).
Fridljander I.N. Metallovedenie aluminija I ego splavov. Spravochnik. [Metallurgy of aluminum and its alloys. Directory]. Moscow: Metallurgia, 1983, 522 p. (in Russian).
Boguslaev V.A., Kachan A. Ja. Kalinina N.E. Aviatsijno-kosmichni materiali ta tehnologii [Aerospace materials and technologies]. Zaporighghja: VAT “MotorSich”, 2009, 383 p. (in Ukrainian).
Maltsev M.V., Barsukova T.A., Borin F.A. Metallografija tsvetnih metallov i splavov [Metallography of non-ferrous metals and alloys]. Moscow: Gosudarstvennoe nauchno-tehnicheskoe izdatelstvo literaturi po chernoj i tsvetnoj metallurgii, 1960, 372 p. (in Russian).
Kalinina N.E., Tkachov U.V., Kalinin V.T. Metodi zahistu materialiv vid korrozii. Gharostojkii cplavi: navch.posibnik [Methods of protecting materials against corrosion. Heat-resistant alloys: teach. Manual]. Dnepropetrovsk: RVV DNU, 2007, 61 p. (in Ukrainian).
Maltsev M.V. Metallografija promishlennih tsvetnih metallov i splavov [Metallography of industrial non-ferrous metals and alloys]. Moscow: Metallurgija, 1970, 368 p. (in Russian).
Fridljander I.N., Beletskij V.M., Krivov G.A. Aluminevie splavi v aviatsionnih konstruktsijah [Aluminium alloys in airframe]. Tehnolog. sistemi [Technolog. Systems]. 2000, №1, pp. 5-17 (in Russian).
Downloads
Published
Issue
Section
License
Редакція Видання категорично засуджує прояви плагіату в статтях та вживає всіх можливих заходів для його недопущення. Плагіат розглядається як форма порушення авторських прав і наукової етики.
При виявлені у статті більш ніж 25% запозиченого тексту без відповідних посилань та використання лапок, стаття кваліфікується як така, що містить плагіат. У цьому випадку стаття більше не розглядається редакцією, а автор отримує перше попередження.
Автори, в статтях яких повторно виявлено плагіат, не зможуть публікуватися в усіх журналах Видавництва ДВНЗ «Придніпровська державна академія будівництва та архітектури».
Автори, які публікуються у цьому журналі, погоджуються з наступними умовами:
- Автори залишають за собою право на авторство своєї роботи та передають журналу право першої публікації цієї роботи на умовах ліцензії Creative Commons Attribution License, котра дозволяє іншим особам вільно розповсюджувати опубліковану роботу з обов'язковим посиланням на авторів оригінальної роботи та першу публікацію роботи у цьому журналі.
- Автори мають право укладати самостійні додаткові угоди щодо неексклюзивного розповсюдження роботи у тому вигляді, в якому вона була опублікована цим журналом (наприклад, розміщувати роботу в електронному сховищі установи або публікувати у складі монографії), за умови збереження посилання на першу публікацію роботи у цьому журналі.
- Політика журналу дозволяє і заохочує розміщення авторами в мережі Інтернет (наприклад, у сховищах установ або на особистих веб-сайтах) рукопису роботи, як до подання цього рукопису до редакції, так і під час його редакційного опрацювання, оскільки це сприяє виникненню продуктивної наукової дискусії та позитивно позначається на оперативності та динаміці цитування опублікованої роботи (див. The Effect of Open Access).